? coilcraft, inc. 2005 specifications subject to change without notice. please check our website for latest information. smt power inductors - lpo6013 series document 286-1 document 286-1 revised 01/14/05 the lpo6013 series is designed for applications requiring the smallest possible size in a low profile part. recommended applications include notebook computers, pc cards, cel- lular phone handsets, and handheld products. the specially designed ceramic case protects the winding and its flat top provides the best possible surface for pick and place handling. its com- pact design minimizes the pc board space required. coilcraft designer?s kit c152 contains samples of all values shown. visit http://order.coilcraft.com to order on-line, or contact coilcraft. 1. when ordering, please specify packaging code: lpo6013-473kx c packaging: c =7 machine-ready reel. eia-481 embossed plastic tape (1000 parts per full reel). b = less than full reel. in tape, but not machine ready. to have a leader and trailer added ($25 charge), use code letter c instead. d =13 machine-ready reel. eia-481 embossed plastic tape (3500 parts per full reel). 2. inductance tested at 100 khz, 0.1 vrms, 0 adc. 3. dc current at which the inductance drops 10% (typ) from its value without current. 4. average current for a 40c rise above 25c ambient. 5. operating temperature range -40c to +85c. 6. electrical specifications at 25c. see qualification standards section for environmental and test data. 1 dcr srf 2 l 2 max typ 2 i sat 3 3 i rms 4 2 part number 1 (h) (ohms) (mhz) (a) (a) lpo6013-102mx_ 1.0 20% 0.06 200 1.9 1.5 lpo6013-152mx_ 1.5 20% 0.07 200 1.6 1.4 lpo6013-222mx_ 2.2 20% 0.08 150 1.3 1.3 lpo6013-332mx_ 3.3 20% 0.11 110 1.1 1.3 lpo6013-392mx_ 3.9 20% 0.13 100 1.0 1.2 lpo6013-472mx_ 4.7 20% 0.15 90 0.90 1.2 lpo6013-682mx_ 6.8 20% 0.20 70 0.70 1.2 lpo6013-822mx_ 8.2 20% 0.22 65 0.70 1.0 lpo6013-103kx_ 10 . 10% 0.30 60 0.60 1.0 lpo6013-153kx_ 15 . 10% 0.38 47 0.55 0.85 lpo6013-223kx_ 22 . 10% 0.52 37 0.45 0.80 lpo6013-333kx_ 33 . 10% 0.73 30 0.40 0.74 lpo6013-393kx_ 39 . 10% 0.96 28 0.35 0.67 lpo6013-473kx_ 47 . 10% 1.0 25 0.30 0.60 lpo6013-683kx_ 68 . 10% 1.7 21 0.28 0.49 lpo6013-104kx_ 100 . 10% 3.2 17 0.22 0.35 lpo6013-154kx_ 150 . 10% 4.3 14 0.19 0.30 lpo6013-224kx_ 220 . 10% 5.8 10 0.15 0.26 lpo6013-334kx_ 330 . 10% 7 8 0.13 0.23 lpo6013-474kx_ 470 . 10% 10 7 0.10 0.20 lpo6013-684kx_ 680 . 10% 14 5.6 0.09 0.18 lpo6013-105kx_ 1000 . 10% 21 4.7 0.07 0.13
? coilcraft, inc. 2005 specifications subject to change without notice. please check our website for latest information. smt power inductors - lpo6013 series document 286-2 document 286-2 revised 01/14/05 typical l vs frequency typical l vs current 0.220 5,6 max 0.051 1,3 max 0.230 5,84 min 0.134 3,4 typ 0.050 1,27 typ 0.040 0.005 1,016 0,127 0.236 6,0 max 0.250 6,35 min recommended land pattern dash number internal code xxx x weight: 111 ? 122 mg terminations: silver-palladium-platinum tape and reel: 1000/7 reel; 3500/13 reel 12 mm tape width for packaging data see tape and reel specifications section.
|
